Every automobile equipped with an hydraulic braking system whether or not assisted by other means, which provides braking action on four or more wheels, shall be equipped with a service brake system so arranged as to provide separate systems for at least two wheels and so designed and constructed that rupture or leakage-type failure of any single pressure component of the service brake system, except structural failures of the brake master cylinder body, effectiveness indicator body, or other housing common to the divided system, will not result in complete loss of function of the vehicle brakes when force on the brake pedal is continued. Every automobile shall be provided with at least two braking systems, one of which shall be the service brake system, and the other shall be the parking brake system, each with a separate means of application, each operating directly or indirectly on at least two wheels and each of which shall suffice alone to stop said automobile within a proper distance as defined in said rules and regulations provided, that if such systems are connected, combined or have any part in common, such systems shall be so constructed that a breaking of any one element thereof will not leave the automobile without brakes acting directly or indirectly on at least two wheels and provided, further, that a tractor having a draw-bar pull rating of ten horse power or less and capable of a maximum speed of not more than eighteen miles an hour and designed specially for use elsewhere than on the traveled part of ways may be operated thereon if equipped with a single braking system which shall suffice to stop such tractor within a proper distance as aforesaid. Every motor vehicle operated in or upon any way shall be provided with brakes adequate to control the movement of such vehicle and conforming to rules and regulations made by the registrar, and such brakes shall at all times be maintained in good working order.
Section 7: Brakes, braking systems, mufflers, horns, lights, audible warning systems, and other equipment compliance with safety standards stickers and emblems
0 kommentar(er)
